加硬不锈钢，普通模具钢，预硬模具钢，HRC60以下。用于精加工，半精加工和粗加工（±5μm）。
圆角正方形（角半径）立铣刀：用于粗铣以去除大量毛坯，也可精铣平坦表面（相对于陡峭表面）的小倒角
| 规格 | 刃径 | R | 刃长 | 柄部直径 | 总长 |
| D1.0XR0.2X3XD4X50 | 1.0 | 0.2 | 3 | 4 | 50 |
| D1.5XR0.2X4XD4X50 | 1.5 | 0.2 | 4 | 4 | 50 |
| D1.5XR0.5X4XD4X50 | 1.5 | 0.5 | 4 | 4 | 50 |
| D2.0XR0.2X6XD3X50 | 2.0 | 0.2 | 6 | 4 | 50 |
| D2.0XR0.2X6XD4X50 | 2.0 | 0.2 | 6 | 4 | 50 |
| D2.0XR0.3X6XD4X50 | 2.0 | 0.3 | 6 | 4 | 50 |
| D2.0XR0.5X6XD4X50 | 2.0 | 0.5 | 6 | 4 | 50 |
| D2.5XR0.2X7XD4X50 | 2.5 | 0.2 | 7 | 4 | 50 |
| D2.5XR0.5X7XD4X50 | 2.5 | 0.5 | 7 | 4 | 50 |
| D3.0XR0.2X8XD4X50 | 3.0 | 0.2 | 8 | 4 | 50 |
| D3.0XR0.3X8XD4X50 | 3.0 | 0.3 | 8 | 4 | 50 |
| D3.0XR0.5X8XD3X50 | 3.0 | 0.5 | 8 | 3 | 50 |
| D3.0XR0.5X8XD4X50 | 3.0 | 0.5 | 8 | 4 | 50 |
| D3.0XR1.0X8XD3X50 | 3.0 | 1 | 8 | 3 | 50 |
| D3.0XR1.0X8XD4X50 | 4.0 | 1 | 8 | 4 | 50 |
| D4.0XR0.2X11XD4X50 | 4.0 | 0.2 | 11 | 4 | 50 |
| D4.0XR0.3X11XD4X50 | 4.0 | 0.3 | 11 | 4 | 50 |
| D4.0XR0.5X11XD4X50 | 4.0 | 0.5 | 11 | 4 | 50 |
| D4.0XR1.0X11XD4X50 | 4.0 | 1 | 11 | 4 | 50 |
| D5.0XR0.5X13XD5X50 | 5.0 | 0.5 | 13 | 5 | 50 |
| D5.0XR0.5X13XD6X50 | 5.0 | 0.5 | 13 | 6 | 50 |
| D5.0XR1.0X13XD5X50 | 5.0 | 1 | 13 | 5 | 50 |
| D5.0XR1.0X13XD6X50 | 5.0 | 1 | 13 | 6 | 50 |
| D6.0XR0.2X15XD6X50 | 6.0 | 0.2 | 15 | 6 | 50 |
| D6.0XR0.5X15XD6X50 | 6.0 | 0.5 | 15 | 6 | 50 |
| D6.0XR1.0X15XD6X50 | 6.0 | 1 | 15 | 6 | 50 |
| D6.0XR1.5X15XD6X50 | 6.0 | 1.5 | 15 | 6 | 50 |
| D6.0XR2.0X15XD6X50 | 6.0 | 2 | 15 | 6 | 50 |
| D8.0XR0.5X20XD8X60 | 8.0 | 0.5 | 20 | 8 | 60 |
| D8.0XR1.0X20XD8X60 | 8.0 | 1.5 | 20 | 8 | 60 |
| D8.0XR1.5X20XD8X60 | 8.0 | 1.5 | 20 | 8 | 60 |
| D8.0XR2.0X20XD8X60 | 8.0 | 2 | 20 | 8 | 60 |
| D10.0XR0.5X25XD10X75 | 10.0 | 0.5 | 25 | 10 | 75 |
| D10.0XR1.0X25XD10X75 | 10.0 | 1 | 25 | 10 | 75 |
| D10.0XR1.5X25XD10X75 | 10.0 | 1.5 | 25 | 10 | 75 |
| D10.0XR2.0X25XD10X75 | 10.0 | 2 | 25 | 10 | 75 |
| D10.0XR2.5X25XD10X75 | 10.0 | 2.5 | 25 | 10 | 75 |
| D10.0XR3.0X25XD10X75 | 10.0 | 3 | 25 | 10 | 75 |
| D12.0XR0.5X30XD12X75 | 12.0 | 0.5 | 30 | 12 | 75 |
| D12.0XR1.0X30XD12X75 | 12.0 | 1 | 30 | 12 | 75 |
| D12.0XR1.5X30XD12X75 | 12.0 | 1.5 | 30 | 12 | 75 |
| D12.0XR2.0X30XD12X75 | 12.0 | 2 | 30 | 12 | 75 |
| D12.0XR2.5X30XD12X75 | 12.0 | 2.5 | 30 | 12 | 75 |
| D12.0XR3.0X30XD12X75 | 12.0 | 3 | 30 | 12 | 75 |
1.特点：a。适用于HRC50-HRC60模具及淬硬件，精加工。b.AlTiN涂层采用先进的技术和设备，铝含量高，耐高温，抗氧化（800℃），即使在干燥或高速条件下也能表现出最佳性能。c。锋利的切削力和合理的刀具强度搭配，圆弧的后角使刀具更加耐磨，平面的后角使刀具更锋利，更强劲，切削过程更轻巧，刀具寿命更长。
2.设计:
| 1.Double core diameter design ideal.:strong strength for plunge and pocket milling ideal using on stainless steel a.The small core diameter of the front end can ensure the chip removal smooth ,take away the heat of cutting production, and prevent the production of built-up edge b.The big core diameter at the back end ehance the rigidity of cutting tools and improve the surface quality of products |
| 2.a≠b Unequal design：prevents vibration and reduces cutting force at slotting. This has led to the high speed and high feed machining |
| 3.Variable helix to prevent vibration Special variable pitch profile reduces cutting force and stress on machine spindle |
1.涂装前进行钝化技术，精细边缘处理，不易产生积屑瘤
 | Before passivation treament(133 times) | |
 |  | after passivtion treament with brush(133 times) |
 |  | After brush passivation treament + sandblasting polishing (133 times) |
2.四次切削刀具检测，确保质量
| 1）在生产过程中使用Helicheck PlusWalter设备进行前件，尾件和抽样检查，以全面检查周向耙，圆周边缘后角，端齿前角，端齿后角，R角值和轮廓，成型刀的轮廓 | ||
| （2）生产后，用二维测量仪或显微镜进行全面检查，刃数，外径，刃长，铁心直径，螺旋角，后角的宽度，端面齿的偏心度和端面齿的中心，端面的盘角牙齿，外跳动和是否有缺口，锯齿状 | ||
| (3) 涂装前用二维测量仪进行点检 | ||
| (4)涂装后用二维测量仪进行全面检查 |
3.优秀的研发团队和专业的技术支持团队
 | 1.装在塑料管中，每组10件，并在纸箱中装气泡纸，以减少冲击。 |
 | 2.客户接受的其他包装要求也被接受。 |
| 1.装在塑料管中，每组10件，并在纸箱中装气泡纸，以减少冲击。 |
| 2.。其他由客户设计的包装要求将被接受。 |
